1108.10 SIGN CONSTRUCTION STANDARDS.
   (a)   All metal parts used in a sign or sign structure, including supports and braces, shall be galvanized or of corrosive-resistant material or painted with approved corrosive-resistant paint.
   (b)   When existing poles or structures are used for new sign installation, all parts shall be brought to like-new condition and shall be painted with approved rust and corrosion- resistant paint.
   (c)   No equipment, such as cables to support electric circuits, light fixtures, or guys, may be added to a sign structure or supports other than as approved by the Planning Commission and detailed in the sign permit materials. Brackets, wires, switches, and other materials required to illuminate the sign may be added.
   (d)   When a sign structure or supports are used in any manner other than outlined herein, certification by a licensed engineer shall be obtained to show the structure is capable of supporting the load.
   (e)   Projecting signs, such as marquee signs, shall not be installed on a building or structure unless the support has been designed specifically for the purpose of supporting a sign and approved by the Building Commissioner.
   (f)   All electrical signs shall be plainly marked on the bottom edge of the sign, using three- quarter (3/4) inch minimum letters with the erector's name, the voltage, amperes or watts, and the date of installation. All signs shall be adequately grounded.
   (g)   All wiring, fittings, and materials used in construction, connection, and operation of electrically illuminated signs shall be in accordance with the provisions of the National Electric Code. Electric sign wiring shall be maintained in weather-proof condition during erection or alteration by use of permanent or temporary cover.
   (h)   When a sign is removed for any reason, a new sign permit for the future installation of any sign shall be obtained, or all mast arms, cables, guys of any nature, clips, brackets, and all structure of the old sign shall be removed with the sign.
   (i)   Glass in any sign shall be either double strength, plate, or wired glass.
(Ord. 2022-34. Passed 1-9-23.)