The following table identifies the specific development standards that apply to each of the industrial zoning districts.
TABLE 1104.04-1: INDUSTRIAL DISTRICT DIMENSIONAL STANDARDS
L-I | G-I | |
Minimum Front Yard Setback 2 | 50 feet | 50 feet |
Minimum Side Yard Setback 2 | 20 feet (40 feet if adjacent to residential) | 20 feet (40 feet if adjacent to residential) |
Minimum Rear Yard Setback 2 | 20 feet (40 feet if adjacent to residential) | 20 feet (40 feet if adjacent to residential) |
Minimum Lot Width | 125 feet | 125 feet |
Minimum Lot Area | 1 acre | 1 acre |
Minimum Open Space | 20% | 20% |
Maximum Height 1 | 42 feet | 42 feet |
Minimum Accessory Structure Setbacks | Same as principal building | Same as principal building |
Maximum Accessory Structure Height | 20 feet | 20 feet |
Minimum Parking Front Yard Setback | 20 feet | 20 feet |
Minimum Parking Side Yard Setback | 10 feet (20 feet if adjacent to residential) | 10 feet (20 feet if adjacent to residential) |
Minimum Parking Rear Yard Setback | 10 feet (20 feet if adjacent to residential) | 10 feet (20 feet if adjacent to residential) |
(a) Building Height Regulations. In the L-I and G-I Zoning Districts, any building that exceeds thirty (30) feet is required to provide an additional one (1) foot of side and rear yard setbacks for every foot of building height that exceeds thirty (30) feet. Height exceptions for architectural projections are regulated in Section 1104.06(b).
(b) Yard Requirement Exceptions. Yard requirements may be reduced, if approved by Planning Commission, where on-site circulation, parking, and loading are coordinated with adjoining developments and set forth in a joint agreement.
(Ord. 2022-34. Passed 1-9-23.)