APPENDIX A: PLATTING CHECKLISTS

Following are checklist forms which are to be used by the platting commissioner when reviewing submitted drawings.

FORM 1:   PRELIMINARY DRAWING CHECKLIST

FORM 2:   TECHNICAL DESIGN AND IMPROVEMENT CHECKLIST

FORM 3:   FINAL PLAT CHECKLIST

FORM NO. 1
PRELIMINARY DRAWING CHECKLIST
Date:
Application No.:
Subdivision:
The following list of items (does, does not) conform with the requirements of Chapter 151 of this code.
	Does	Does Not	Item
1.			Name of subdivision (no duplication permitted)
2.			Locational description
3.			Name and address of owner, developer, surveyor and engineer
4.			Sheet size, 24 inches x 36 inches (index sheet, if more than one sheet)
5.			Proper scale
6.			Date and north point
7.			Vicinity map
8.			Names of adjacent subdivisions and owners
11.			Locations, widths, and names of existing streets, rights-of-way, easements
12.			Location and dimensions of existing buildings and parks
13.			Corporation, township, range, section lines
14.			Location of existing utilities including sewers, water lines, gas lines, cable television, electric, and telephone poles
15.			Layout, names and widths of proposed streets or easements and proper dedications
16.			Layout and approximate dimensions of all lots
17.			Building setback lines
18.			Survey monuments of adjacent properties
19.			Parks and open space and proper dedications
20.			Proposed use of lots
21.			Copy of proposed deed restrictions, if any
Date			Title or Position:
			Signature:

FORM 2
TECHNICAL DESIGN AND IMPROVEMENT CHECKLIST
The following list of items (does, does not) conform with or does not apply (NA) to the requirements of Chapter 151 of this code.
	Does	Does Not	NA	Item
				General
1.				Conformance with Major Thoroughfare Plan
2.				Conformance with zoning regulations
3.				No flood hazard
4.				Acceptable natural drainage and erosion control
5.				Steep slopes not limiting factor
6.				Large trees and other significant natural features
7.				Area of historical or cultural significance
8.				Right-of-way widths
9.				Pavement widths
10.				Radius of curvature
11.				Horizontal visibility
				Streets
12.				Vertical alignment and visibility
13.				Grades
14.				Cul-de-sacs
15.				Turn around radius - ROW - and pavements
16.				Dead-end streets
17.				Dedication and addition of half streets
18.				Marginal access streets, points of access and planning strips
				General
19.				Alleys
20.				Alignment of intersections
21.				Spacing of intersection relative to different road classifications
22.				Avoidance of multiple intersections
23.				Avoidance of four-way intersections
24.				Pavement and ROW of intersections
25.				Streets for commercial subdivision
26.				Repair of pavement
27.				Streets for industrial subdivision
28.				Length of blocks
29.				Crosswalks
30.				Street monuments
31.				Subgrade
32.				Base course
33.				Surface course
34.				Curbs and gutters
35.				Bridges
36.				Sidewalks
37.				Street names and numbers, signs
				Lots
38.				Size, dimensions
39.				Setback lines
				General
40.				Corner lot size
41.				Proper use of double frontage lots
42.				Driveway culverts and grade
43.				Monuments
44.				Grading plan
45.				Type of water supply
46.				Test wells
47.				Type of sewage treatment
48.				Percolation test results
49.				Storm drainage system type
50.				Manholes
51.				Catch basins
52.				Headwalls
53.				Sufficient easements for utilities or open drainage
54.				Street lighting and poles
55.				Underground utilities
56.				Other utilities
Date			Title
			Signature

FORM 3
FINAL PLAT CHECKLIST
Date:
Application No.:
Subdivision:
The following list of items (does, does not) conform with the requirements of Chapter 151 of this code.
	Does	Does Not	Item
1.			Conforms to preliminary drawing and incorporates suggested changes
2.			Name of subdivision
3.			Proper scale
4.			Date and north point
5.			Locational description
6.			Sheet size, 20 inches x 30 inches (index sheet, if more than one sheet)
7.			Name and address of owner, surveyor, and engineer
8.			Accurate survey data - seconds; lineal dimensions to hundredths of feet; radii, internal angles; points of curvature; tangent bearing; lengths of arcs; lengths of chords
9.			Closure
10.			Bearings and distances to permanent monuments
11.			Name, location, width, and centerline of streets
12.			Lot numbers and dimensions
13.			Location and description of monuments
14.			Building setback line
15.			Final deed restriction
16.			Final improvement plans
17.			Installation or guarantee of installation of improvements
18.			Required final certifications
Date		Title or Position
		Signature