1335.30 PLANS TO BE SUBMITTED TO BUILDING DEPARTMENT.

   Plans, specifications and pertinent explanatory data required to be submitted in connection with an application for a permit to construct a family swimming pool or any alteration, addition, remodeling or other improvement thereto, shall comply with the following requirements, and shall include the following plans and information, as well as such other data as may reasonably be requested by the Safety Director and the Building Commissioner:

   (a)    Plans shall be drawn to a scale of not less than one-eighth inch per foot, indicating all materials and methods of construction and all dimensions, including the length, width and depth of the pool and the width of the pool deck;

   (b)    A profile plan showing the same information;

   (c)    A plot plan showing the position of the pool in relation to buildings and lot lines;

   (d)    A cross-section of scum gutters, skimmers or overflow troughs, where used;

   (e)    Pipe diagrams showing the size of all pipes, inlets, outlets, makeup water lines, vacuum lines, waste and discharge lines, circulating and other piping;

   (f)    The pool equipment layout, showing filters, pumps, chlorinators, hair and lint interceptors and their locations and other pertinent information;

   (g)    The liquid capacity of the pool;

   (h)    The liquid capacity of an accessory wading pool, if any;

   (i)    The kind, number and size of filters, including the square footage of the filter area in each unit;

   (j)    The top capacity in gallons per minute;

   (k)    The method of chlorination to be used;

   (l)    The type and range of testing equipment;

   (m)    The type, design and location of enclosing fence;

   (n)    A description and plan of lighting facilities.

      (1964 Code §56.31)