1335.20 PLANS TO BE SUBMITTED TO BUILDING DEPARTMENT.
Plans, specifications and pertinent explanatory data submitted in connection with an application for a permit to construct a public swimming pool or any alteration, addition, remodeling or other improvement thereto shall comply with the following requirements and shall include the following plans and information as well as such data as may reasonably be requested by the Safety Director or the Building Commissioner:
(a) Plans shall be drawn to a scale of not less than one-eighth inch per foot, indicating all materials and methods of construction and indicating all dimensions, including the length, width and depth of the pool and the width of the pool deck;
(b) A profile plan showing the same information;
(c) A plot plan showing the position of the pool in relation to buildings and lot lines;
(d) A cross-section of scum gutters, skimmers or overflow troughs, where used;
(e) Pipe diagrams showing the size of all pipes, inlets, outlets, makeup water lines, vacuum lines, waster and discharge lines, circulation and other piping;
(f) The pool equipment room layout, showing filters, their location, pumps, chlorinators, chemical feeders, flow meter gauges, sight glass, strainers, hair and lint interceptors, dimensions of the filter room and its location, floor drain, sumps and other pertinent information;
(g) The liquid capacity of the pool;
(h) The liquid capacity of an accessory wading pool, if any;
(i) The kind, number and size of filters, including the square footage of the filter area in each unit;
(j) The top capacity in gallons per minute, of the recirculating system;
(k) A description of chemical feeders for soda ash and alum;
(l) The type, kind and description of chlorinator;
(m) The type and range of testing equipment, including chlorine;
(n) A description and plan of lighting facilities;
(o) The type, design and location of enclosing fence. (1964 Code §56.20)