(A) Site plan approval required. Development, redevelopment and/or expansion of an RV park or manufactured home park shall require city approval of a site plan in accordance with Vol. II, § 1-16-9.
(B) Building permit required. It shall be unlawful for any person to install a manufactured home, park model, structure, addition or any electrical, plumbing, or mechanical component without first obtaining a required permit or permits from the Building Division.
(C) Owner approval required. No person shall install any manufactured home, structure or addition without approval of the property owner, the owner's agent, or other authorized representative.
Recreational Vehicle Park | Manufactured Home Park | |
Required Zoning: | RVP | MHP |
Minimum Park Area: | 10 acres | 10 acres |
Minimum Space Size: | 2,000 sq. ft. | 3,500 sq. ft. |
Minimum Space Width: | 30 feet | 50 feet |
Front Setback1: | 3 feet | 8 feet |
Street Side Setback1: | 3 feet | 8 feet |
Side Setback2: | 3 feet | 5 feet |
Rear Setback2: | 3 feet | 5 feet |
Property Line Setback: | 5 feet | 5 feet |
Max. Acc. Structure Height | 20 feet | 20 feet |
1. The front setback and street side setback shall be measured from the nearest edge of the interior road/curb fronting the park space/lot.
2. One detached accessory storage structure smaller than 120 square feet in size may be located anywhere to the side or rear of the RV or manufactured home. Additional accessory structures, including awnings, shall comply with the front, side and rear setbacks in Vol. II, Table 9-1 above.
(Ord. 1402, passed 5-6-2014)