§ 1-5-4 NON-RESIDENTIAL BULK REGULATIONS.
   Table 5-4 illustrates the bulk requirements for all non-residential zoning districts.
TABLE 5-4: NON-RESIDENTIAL BULK REGULATIONS
 
USE TYPE4
B-1 General
B-2 Old West
B-3 City Cen.
B-4 Bus. Park
B-5 Industrial
PI Public/Inst.
Minimum Lot Area1
7,000 sf.
5,000 sf.
7,000 sf.
15,000 sf.
15,000 sf.
15,000 sf.
Minimum Lot Width2
50 ft.
50 ft.
50 ft.
75 ft.
75 ft.
75 ft.
Maximum Residential Density3
22 units/ac
22 units/ac
40 units/ac
Not Applicable
Not Applicable
22 units/ac
Minimum Lot Area per Dwelling Unit
1,980 sf.
1,980 sf.
1,089 sf.
Not Applicable
Not Applicable
1,980 sf.
Minimum Front Setback (main structure)
20 ft.
0 ft.
0 ft.
20 ft.
20 ft.
20 ft.
Minimum Front Setback (accessory structure)
20 ft.
20 ft.
20 ft.
20 ft.
20 ft.
20 ft.
Minimum Interior Side Setback (accessory structure)
10 ft.
5 ft.
5 ft.
10 ft.
10 ft.
10 ft.
Minimum Street Side Setback (all structures)
10 ft.
0 ft.
0 ft.
10 ft.
10 ft.
10 ft.
Minimum Rear Setback (all structures)
10 ft.
5 ft.
5 ft.
10 ft.
10 ft.
10 ft.
Minimum Front Setback (Parking)
10 ft.
10 ft.
10 ft.
10 ft.
10 ft.
10 ft.
Maximum Size for Accessory Structure
No limit
No limit
No limit
No limit
No limit
No limit
Maximum Height for Main Structure
35 ft.
35 ft.
60 ft.
35 ft.
35 ft.
35 ft.
Maximum Height for Accessory Structures
20 ft.
20 ft.
20 ft.
35 ft.
35 ft.
35 ft.
 
Footnotes from Table 5-4:
1.   Minimum lot area shall be calculated as net land area. For condominiums or townhomes no minimum lot size or width shall be required.
2.   Minimum lot width is the distance between side lot lines, measured perpendicular to the lot depth at the front setback line. Minimum lot width measurement for flag lots shall be interpreted by the Zoning Administrator. Lot width, as measured at the front setback line, shall not be less than 25% of the lot depth, unless waived by the Zoning Administrator due to unique environmental or geographic conditions.
3.   Maximum density shall be calculated as the total number of dwelling units/net land area.
4.   In addition to the standards listed in Vol. II, Table 5-4 above, the following supplemental standards shall apply to institutional and business zoning districts.
   Fences and Walls: See Vol. II, § 1-6-3.
   Landscaping and Screening: See Vol. II, Article 1-8.
   Lighting and Illumination: See Vol. II, Article 1-10.
   Parking and Loading: See Vol. II, Article 1-7.
   Outdoor Storage: See Vol. II, § 1-6-9.
   Solar Panels and Alternative Energy: See Vol. II, § 1-6-16.
   Signs: See Vol. II, Article 1-11.
   Visibility at Intersections: See Vol. II, § 1-6-13.
   Temporary Use and Structures: See Vol. II, § 1-6-23.
   Design Guidelines: See Vol. II, Article 1-13.
NOTE: A site plan and design review application is required for all new development prior to applying for building permits.
(Ord. 1402, passed 5-6-2014; Ord. 1508, passed 9-21-2021)