(A) Residential garage design.
(1) Minimum dimensions for residential enclosed garage (inside dimensions between walls):
Single-car garage 10' x 20'
Side by side double-car garage 20' x 20'
Tandem double-car garage 10' x 40'
(2) Exterior design must be architecturally compatible with the main building.
(3) Any garage serving a multi-family dwelling or single-family attached dwelling that is visible from a street shall be limited in width to no more than 50% of the width of the facade of the residential dwelling; consistent with Section TBD, Garage Frontage. For the purposes of this requirement, garage width is considered the width of that portion of a building, facade that is backed by a garage space. This dimension is measured from midpoint to midpoint fo any enclosing walls that are perpendicular to the garage door or entry.
(B) Carports design.
(1) Each carport shall measure nine feet by 20 feet. The width of the carport is to be measured from the inside face of support to inside face of opposite support. The carport roof shall cover the entire 20 foot length of the space.
(2) Carports shall be designed and located so that they are not visible from a street and shall be architecturally compatible with the main building.
(Ord. 897-C-S, passed 10-25-94; Ord. 2089-C-S, passed 6-24-14) Penalty, see § 9-5.2904