(A) Concrete monuments, the specifications of which are set forth in this section, shall be set in each subdivision. At least two reference ties shall be established in the most permanent manner possible, to the exterior corners of the part finally platted. The markers and ties shall be shown on each final plat of all subdivisions. The monuments shall be placed normally on block corners or points of curve and shall be no more than 1,000 feet apart.
(B) The monuments shall be constructed of reinforced concrete (3,000 psi in 28 days) and have no less than two No. 3 deformed bars in them, evenly spaced. The monuments shall be six inches in diameter and 36 inches in length. Each monument shall have a cross case in the top center or a copper rod extending one-fourth inch above the concrete. All such monuments may be precast or cast in the hole.
(Prior Code, Appendix A, § 50.70) (Ord. 703, passed 3-15-1971)