Minimum pavement widths, face to face of curb, required to be installed at the subdivider's expense, shall be as follows:
(a) Primary and secondary thoroughfares and parkways, shown as such on the Thoroughfare Plan, local streets or collector streets, and minor streets over 600 feet long: twenty-six feet.
In the case of primary or secondary thoroughfares or parkways and in the case of local streets or collector streets usually requiring pavements wider than twenty-six feet, the matter of financial and other arrangements for installing such wider pavements at the time the subdivider makes the improvement shall be taken up by the subdivider with the officials having jurisdiction.
(b) Minor and dead-end streets not over 600 feet long, or streets in estate type subdivisions: twenty-two feet (face to face of curb where curb is required or otherwise installed). The pavement of a turning circle at the end of a dead-end street shall have a minimum outside diameter of sixty feet. A "T" or "Y"-shaped paved space, when approved by the Planning Commission in place of a turning circle, shall extend entirely across the width of the street right of way and shall be at least ten feet wide with the flared portion rounded by minimum radii of twenty feet.
(c) Alleys and service drives: eighteen feet.
(Ord. 64-47. Passed 4-27-64.)