(a) All lots and buildings shall meet the minimum area and width requirements of Table 1250.03. New lots shall not be created, except in conformance with these requirements.
(b) All structures and their placement on a lot shall conform to the minimum dimensional requirements listed in Table 1250.03a.
Zoning District | Maximum Building Height (Ft.) | Minimum Yard Setbacks (Ft.) | Lot Coverage (%) | ||||
Front | Side | Rear | |||||
Parking | Building1 | Total | Least | ||||
B-1 | 35 | 0 | 1/102 | 0 | 03 | 54 | 90 |
B-2 | 45 | 20 | 30 | 30 | 155 | 256 | 50 |
1 Average established setback shall apply, where applicable, in accordance with Section 1260.02(a). 2 Buildings shall be set back at least one foot, but not more than ten feet, from the right-of-way line. 3 No side setback is required, unless the side yard abuts a Residential District in which case a minimum side yard of 15 feet shall be provided along that side. 4 If the rear yard abuts a Residential District, a setback of 15 feet shall be provided. 5 If the side yard abuts a Residential District or a Village boundary line, a setback of 30 feet shall be provided. 6 If the rear yard abuts a Residential District or a Village boundary line, a setback of 35 feet shall be provided. |
(Ord. 2013-19. Passed 9-16-13; Ord. 2018-20. Passed 5-21-18; Ord. 2023-20. Passed 5-15-23.)