This section provides for the general restrictions on signs for each of the zoning districts:
(a) R-1 and R-2 Residential and M-1 Manufactured Housing Districts. One (1) monument or wall sign not exceeding two (2) square feet for a single-family or duplex dwelling for the purpose of displaying the address of the structure.
(b) C-1 Suburban Commercial Districts.
(1) A maximum of two (2) wall signs per place of business not exceeding an aggregate total of twice the building frontage and a maximum of 100 square feet.
(2) Monument, projecting, and freestanding signs shall be permitted only by conditional permit approved by the Commission, and shall be counted as one (1) of the maximum number of permitted signs.
(c) C-2 High Density Commercial District.
(1) A maximum of two (2) signs per place of business not exceeding an area to be calculated by the formula:
Lot frontage multiplied by 10% of said lot frontage = Maximum aggregate total area. (Example: 45 ft. lot frontage = 45 x 4.5 - 202.5 sq. ft.) In the case of a corner lot, the sign area must face the street frontage used in the calculation. In the case of a multi-use building the area shall calculated using the "use" frontage in the formula above. In no case shall the maximum sign area exceed 300 square feet.
(2) The types of signs permitted in this district are wall, freestanding and projecting. Freestanding signs shall not exceed 40 feet in height, and shall not project over the street or road right-of-way or adjacent property line.
(3) Neon signs which comply with all other applicable requirements.
(Ord. 2005-06-02. Passed 3-20-06.)