Loading...
§ 53.076 FLAMMABLE, TOXIC, CORROSIVE AND OBSTRUCTIVE SUBSTANCES.
   (A)   No person shall discharge or cause to be discharged any of the following described waters or wastes to any public sewers:
      (1)   Any gasoline, benzene, naphtha, fuel oil or other flammable or explosive liquid, solid or gas;
      (2)   Any waters or wastes containing toxic or poisonous solids, liquids or gases in sufficient quantity, either singly or by interaction with other wastes, to injure or interfere with any waste treatment process, constitute a hazard to humans or animals, create a public nuisance or create any hazard in the receiving waters of the wastewater treatment plant;
      (3)   Any waters or wastes having a pH lower than 5.5, or having any other corrosive property capable of causing damage or hazard to structures, equipment and personnel of the sewage works;
      (4)   Solid or viscous substances in quantities or of such size capable of causing obstruction to the flow in sewers, or other interference with the proper operation of the sewage facilities, such as, but not limited to, ashes, cinders, sand, mud, straw, shavings, metal, glass, rags, feathers, tar, plastics, wood, unground garbage, whole blood, paunch manure, hair and fleshings, entrails and paper dishes, cups, milk containers and the like, either whole or ground by garbage grinders; and/or
      (5)   Any waters or wastes having:
         (a)   A five-day BOD greater than 300 parts per million by weight;
         (b)   Containing more than 350 parts per million by weight of suspended solids;
         (c)   An average daily flow greater than 2% of the average sewage flow of the municipality; or
         (d)   A chlorine requirement greater than demanded by normal sewage as evaluated by the municipality’s consulting engineer shall be subject to the review of the Superintendent.
   (B)   Where necessary in the opinion of the Superintendent, the owner shall provide, at his or her expense, such preliminary treatment as may be necessary to:
      (1)   Reduce the biochemical oxygen demand to 300 parts per million by weight;
      (2)   Reduce the suspended solids to 350 parts per million by weight;
      (3)   Control the quantities and rates of discharge of such waters or wastes; or
      (4)   Reduce the chlorine requirement to conform with normal sewage.
   (C)   Plans, specifications and other pertinent information relating to proposed preliminary treatment facilities shall be submitted for the approval of the Superintendent, and no construction of such facilities shall be commenced until said approvals are obtained in writing.
(Prior Code, § 3-240) Penalty, see § 53.999
§ 53.077 SPECIAL PROHIBITIONS.
   (A)   No person shall discharge or cause to be discharged the following described substances, materials, waters or wastes if it appears likely in the opinion of the Superintendent that such wastes can harm either the sewers, sewage treatment process or equipment, have an adverse effect on the receiving stream or can otherwise endanger life, limb, public property or constitute a nuisance. In forming his or her opinion as to the acceptability of these wastes, the Superintendent will give consideration to such factors as the quantities of subject wastes in relation to flows and velocities in the sewers, materials of construction of the sewers, nature of the sewage treatment process, capacity of the sewage treatment plant and other pertinent factors.
   (B)   The substances prohibited are:
      (1)   Any liquid or vapor having a temperature higher than 150°F (65°C);
      (2)   Any water or waste containing fats, wax, grease or oils, whether emulsified or not, in excess of 100 mg/l or containing substances which may solidify or become viscous at temperatures between 32° and 150°F (0° and 65°C);
      (3)   Any garbage that has not been properly shredded. The installation and operation of any garbage grinder equipped with a motor three-fourths’ horsepower (0.76 hp metric) or greater shall be subject to the review and approval of the Superintendent;
      (4)   Any waters or wastes containing strong acid iron pickling wastes or concentrated plating solutions, whether neutralized or not;
      (5)   Any water or wastes containing iron, chromium, copper, zinc and similar objectionable or toxic substances; or wastes exerting an excessive chlorine requirement, to such degree that any such material received in the composite sewage at the sewage treatment works exceeds the limits established by the Superintendent for such materials;
      (6)   Any waters or wastes containing phenols or other taste- or odor-producing substances, in such concentrations exceeding limits which may be established by the Superintendent as necessary, after treatment of the composite sewage, to meet the requirements of state, federal or other public agencies of jurisdiction for such discharge to the receiving waters;
      (7)   Any radioactive wastes or isotopes of such half-life or concentration as may exceed limits established by the Superintendent in compliance with applicable state or federal regulations;
      (8)   Any waters of wastes having a pH in excess of 9.5;
      (9)   Materials which exert or cause:
         (a)   Unusual concentrations of inert suspended solids (such as, but not limited to, Fuller’s earth, lime slurries and lime residues) or of dissolved solids, (such as, but not limited to, sodium chloride or sodium sulfate);
         (b)   Excessive discoloration (such as, but not limited to, dye wastes and vegetable tanning solutions);
         (c)   Unusual BOD, chemical oxygen demand or chlorine requirements in such quantities as to constitute a significant load on the sewage treatment works; or
         (d)   Unusual volume of flow or concentration of wastes constituting “slugs” as defined herein.
      (10)   Waters or wastes containing substances which are not amenable to treatment or reduction by the sewage treatment processes employed or are amenable to treatment only to such degree that the sewage treatment plant effluent cannot meet the requirements of other agencies having jurisdiction over discharge to the receiving waters.
(Prior Code, § 3-241) Penalty, see § 53.999
§ 53.078 REJECTION, PRETREATMENT, CONTROL OF DISCHARGE RATE.
   (A)   If any waters or wastes are discharged, or are proposed to be discharged to the public sewers, which waters contain the substances or possess the characteristics enumerated in § 53.077, and which, in the judgment of the Superintendent, may have a deleterious effect upon the sewage works, processes, equipment or receiving waters, or which otherwise create a hazard to life to constitute a public nuisance, the Superintendent may:
      (1)   Reject the wastes;
      (2)   Require pretreatment to an acceptable condition for discharge to the public sewers;
      (3)   Require control over the quantities and rates of discharge; and/or
      (4)   Require payment to cover the added cost of handling and treating the wastes not covered by existing taxes or sewer charges under the provisions of § 53.082.
   (B)   If the Superintendent permits the pretreatment or equalization of waste flows, the design and installation of the plants and equipment shall be subject to the review and approval of the Superintendent, and subject to the requirements of all applicable codes, ordinances and laws.
(Prior Code, § 3-242)
§ 53.079 GREASE, OIL AND SAND INTERCEPTORS.
   Grease, oil and sand interceptors shall be provided when, in the opinion of the Superintendent, they are necessary for the proper handling of liquid wastes containing grease in excessive amounts, or any flammable wastes, sand or other harmful ingredients; except that such interceptors shall not be required for private living quarters or dwelling units. All interceptors shall be of a type and capacity approved by the Superintendent and shall be located as to be readily and easily accessible for cleaning and inspection. In the maintaining of these interceptors, the owner shall be responsible for the proper removal and disposal by appropriate means of the captured material and shall maintain records of the dates and means of disposal which are subject to review by the Superintendent. Any removal and hauling of the collected materials not performed by the owner’s personnel must be performed by currently licensed waste disposal firms.
(Prior Code, § 3-243)
§ 53.080 MAINTENANCE BY OWNER.
   Where preliminary treatment or flow-equalizing facilities are provided for any waters or wastes, they shall be maintained continuously in satisfactory and effective operation by the owner at his or her expense.
(Prior Code, § 3-244)
§ 53.081 CONTROL MANHOLES/SAMPLING STATIONS.
   (A)   When required; installation and maintenance. When required by the Superintendent, the owner of any property serviced by a building sewer carrying industrial wastes shall install a suitable control manhole together with such necessary meters and other appurtenances in the building sewer to facilitate observation, sampling and measurement of the wastes. Such manhole, when required, shall be accessibly and safely located and shall be constructed in accordance with plans approved by the Superintendent. The manhole shall be installed by the owner at his or her expense and shall be maintained by him or her so as to be safe and accessible at all times.
(Prior Code, § 3-245)
   (B)   Method. All measurements, tests and analyses of the characteristics of waters and wastes to which reference is made in this chapter, shall be determined in accordance with the latest edition of Standard Methods for the Examination of Water and Wastewater, published by the American Public Health Association, and shall be determined at the control manhole provided, or upon suitable samples taken at said control manhole. In the event no special manhole has been required, the control manhole shall be considered to be the nearest downstream manhole in the public sewer to the point at which the building sewer is connected. Sampling shall be carried out by customarily accepted methods to reflect the effect of constituents upon the sewage works and to determine the existence of hazards to life, limb and property. (The particular analyses involved will determine whether a 24-hour composite of all outfalls of a premises is appropriate or whether a grab sample or samples should be taken. Normally, but not always, BOD and suspended solids analyses are obtained from 24-hour composites of all outfalls whereas pHs are determined from periodic grab samples.)
(Prior Code, § 3-246)
Loading...