For sites of one-half acre or larger, the grading and erosion control plan must include:
(A) A legible map identifying area to be disturbed, slopes, and resources to be protected and also must include nearest downstream storm water inlets, drainage ways, and neighboring property lines. This plan must be approved and BMPs must be in place before any grading begins. The minimum map size for sites one-half to one acre is eight and one-half inches by 11 inches; for construction sites disturbing more than one acre and industrial sites, minimum map size is 11 inches by 17 inches.
(B) The SWPPP for divisions (A)(1) and (A)(2) in § 151.082 is required for submittal as the ESCP for this section.
(C) All BMPs necessary to achieve soil stabilization on the site itself and including stockpiles of any soil, rock, or any additional landscaping materials on the site. The plan will also include a designated entry/exit point, a concrete washout area on the site, measures to protect the nearest downstream storm water inlet(s), and explain measures to prevent mud-tracking from vehicles and equipment into the street.
(D) Sites up to one-half acres which are not subject to a GECP will be required to apply all BMPs necessary to accomplish soil stabilization based upon the soil conditions and topography of the particular site. A GECP may be required in these areas when sites are consistently noncompliant with this subchapter. Final stabilization requirements set forth in § 151.084 are required for these sites.
(Ord. 2022-01, passed 2-7-2022)