§ 153.083  LOT AREA, HEIGHT, LOT WIDTH, YARD AND OTHER REQUIREMENTS.
   (A)   No structure or building shall exceed 30 feet in height as defined in § 153.004 “Building Height,” except as provided in § 153.009 of this chapter.
   (B)   The following minimum requirements shall be observed subject to the additional requirements, exceptions and modifications as set forth elsewhere in this chapter:
 
Lot Area*
Corner lot
15,000 square feet
Interior lot
15,000 square feet
*A 10% deviation in lot width and/or area may be permitted provided the average lot area for each plat or subdivision shall not be less than 15,000 square feet, and the average lot width not less than 100 feet
 
Lot Width*
Corner lot
100 feet
Interior lot
100 feet
*A 10% deviation in lot width and/or area may be permitted provided the average lot area for each plat or subdivision shall not be less than 15,000 square feet, and the average lot width not less than 100 feet
 
Yard, Building Setback
Front
30 feet
Rear
30 feet or 20% of average lot depth, whichever is greater
Side
10 feet adjacent to another lot
30 feet adjacent to street
 
   (C)   Exterior walls of all principal structures must be covered only with siding (e.g., wood, vinyl, aluminum or metal horizontal lap), stucco, brick, glass or other comparable material as approved by the Zoning Administrator. Prohibited materials include, but are not limited to, cloth, fabric, canvas, plastic sheets, tarps, tarpaper, insulation, sheetmetal and corrugated metal.
(Ord. 09-18, passed - -; Ord. passed 10-11-1963; Ord. 16-12, passed 11-14-2016)