50.15(A) Remote control system requirement. Gated communities within the shall install, at their expense, a remote control system at each entry point into their community in compliance with this Section.
50.15(B) System specifications. The remote control system required by this Section is the “Linear Access Pro Receiver/Transmitter System,” or any compatible system that meets the following specifications:
50.15(B)(1) Wireless based systems;
50.15(B)(2) Gate operators are capable of remote activation from a distance of up to 250 feet by the use of a radio-frequency, programmable transmitter;
50.15(B)(3) Transmitters are block-coded into the access Pro Receiver, or compatible receiver;
50.15(B)(4) Transmitters are capable of individual deletion from the system at any time;
50.15(B)(5) Outputs:
50.15(B)(5)(a) Relay: two form “C” relays, related at one amp @ two volts AC or DC;
50.15(B)(5)(b) LED display: three eight-segment displays to provide system activity and programming information;
50.15(B)(5)(c) LED indicators: front panel indicators are used in conjunction with LED display to provide transmitter and radio activity;
50.15(B)(6) Inputs:
50.15(B)(6)(a) RF: integral 318 MHz super regenerative receiver with -94 dBm sensitivity (nominal); receives MegaCode format transmitters;
50.15(B)(6)(b) Open request terminal: contact closure to ground activates access relay;
50.15(B)(6)(c) Open button: pressing activates access relays; also used to clear trouble codes from MGT;
50.15(B)(6)(d) Keypad: integral 15-key silicone rubber keypad for system programming and interrogation;
50.15(B)(7) Power: 12 to 24 volts AC or DC, 250 mA maximum.
50.15(C) Access for
.
shall be authorized to gain access to any gated community within the to perform the duties of such
in accordance with
.
50.15(D) Maintenance. Maintenance of the installed remote control system(s) shall be the responsibility of the community where it/they are installed.
(Ord. 2010-12, passed 10-4-2010)