(a) The final plat shall conform with the Technical Design Standards as required.
(b) The final plat shall contain the following information:
(1) Name of the subdivision, location by section, range and township; date, north point, written and graphic scale and acreage.
(2) Names and addresses of the subdivider, and the professional surveyor who prepared the final plat.
(3) Plat boundaries, based on accurate traverse, with directional and lineal dimensions.
(4) Bearings and distances to nearest established street lines or other recognized permanent monuments.
(5) Exact locations, right-of-way, and names of all streets within and adjoining the plat to be verified with the Map Room.
(6) Radii, internal angles, points of curvature, tangent bearings, lengths of acres, and lengths and bearings of chords.
(7) All easements and right-of-ways provided for public services or utilities. All plats shall contain a restriction that no permanent structures, plantings, or landscaping etc. shall be permitted in the easement area.
(8) All lot numbers and lines with accurate dimensions in feet and hundredths. House numbers may be required to be shown.
(9) Accurate location and description of all monuments. The plat shall clearly indicate which monuments are in place at the time of certification of the Final Plat by the surveyor. The plat shall also clearly indicate which monuments will be placed, if any, after construction of the improvements and before the completion date.
(10) Accurate outlines of areas to be dedicated or reserved for public use, or any area to be reserved for common uses of all property owners.
(11) The limits of all Flood Hazard Areas (show the FEMA map number and date). Base Flood Elevations and minimum first floor elevations shall be shown for all lots located within Flood Hazard Areas.
(12) Restrictions and covenants the subdivider intends to include in the deeds to the lots in the subdivision.
(13) Certification by a registered surveyor to the effect that the plat represents a survey performed by him or her; that all dimensional details are correct; and that the monuments shown thereon were or will be placed by the established completion date or prior to the sale of each lot, whichever occurs first (See Section 1175.16).
(14) Notarized certification by the owner or owners of the authorization of the plat and dedication of streets and other public areas.
(15) An overlay map including the names of adjacent subdivisions, owners of record of adjoining parcels of unsubdivided land, and the location of their boundary lines.
(16) A vicinity map at a scale generally not more than six thousand feet to an inch shall be shown on, or shall accompany, the final plat.
(17) A written legal description of the boundaries of the subdivision.
(Ord. 2021-17. Passed 9-8-21.)