In a Planned Unit Development (PUD) District, yards and setbacks shall be provided in accordance with the following standards and criteria:
(a) Peripheral yards and setbacks for buildings and uses of the District to any R-1F-80 District shall be provided for in accordance with the following table or as recommended by the Planning Commission and approved by Council:
PUD Use | Setback from PUD use to R-1F-80 Property Line |
Areas developed with single family, cluster or two-family dwelling |
50' |
Areas developed with townhomes |
75' |
Areas developed with any non-residential use or mid-rise multi-family dwellings |
100' |
(b) Building yard setbacks and minimum building lines on all streets shall be according to the following schedule or as recommended by the Planning Commission and approved by Council:
USE | MINIMUM FRONT YARD AND BUILDING LINE | |||
Residential PUD Public Street (Feet) | Infill/ Redevelopment PUD Public Street (Feet) | Town Center PUD (Feet) | Internal Street (Feet) | |
Main Use or Building | 50 | 80 plus bldg. ht. 100 min. | 110 | 13 (as measured from the back of the curb) |
Accessory Use | 50 | 110 | 110 | 13 (as measured from the back of the curb) |
Parking Area | 50 | 110 | 110 | 15 (except a garage door or parking entrance shall be 20 feet from the back of the curb) |
(Ord. 2018-122. Passed 2-7-19.)
(c) Distances between buildings and uses within the Planned Unit Development (PUD) District shall be as established on the final development plan approved by the Commission and Council or as further required to meet City and state codes for fire and safety. In reviewing building separations within the District, the Commission may utilize the standards for yards found in Sections 1211.19, 1211.20 and 1211.21 as guidelines.
(Ord. 1999-66. Passed 6-3-99.)