§ 93.124  CURB AND GUTTER.
   (A)   No person shall construct or cause to be constructed or installed in, on, or along side any city street a curb and gutter without first obtaining a permit to do so from the City Finance Officer.
   (B)   A permit may be granted only if the following specifications shall be met.
      (1)   The curb and gutter shall be concrete (the form to be approved by the City Foreman) with a minimum compressive strength of 4,000 PSI, 24 inches in width and depth of six inches for the gutter section, with a minimum gravel cushion of four inches under the curb and gutter with expansion joints every 20 feet with expansion filler.
      (2)   No curb and gutter can be installed unless one continuous curb and gutter is installed at the same time from the corner of a corner lot to the corner of the opposite corner lot with a continuation of the curb and gutter around each corner lot with concrete fillets on each corner adjacent to the intersection of each street involved, which corner intersection shall have handicap accessible ramps whether or not there are interesting sidewalks adjacent to the curb and gutter.
      (3)   Before installation of the curb and gutter, the involved property owners must have the curb and gutter line surveyed and staked to ensure proper slope of the curb and gutter in relationship to the appropriate storm drains on the intersecting streets, the grade of the street, and present or future sidewalks.
      (4)   All labor and materials shall be the sole responsibility of the individual land owners affected by the installed curb and gutter.
      (5)   The city assumes no liability or responsibility for or from the curb and gutter installation. The land owners involved shall accept full responsibility and liability for and from the installation of the curb and gutter.
(Prior Code, § 11-6-10)  Penalty, see § 93.999