§ 153.256 REGULATIONS IN THE LIMITED MANUFACTURING DISTRICT (LM).
   (A)   General provisions. General provisions for signs in the Limited Manufacturing District shall be as set forth for General Commercial (GC), Suburban Office (SO), and Planned Commercial District (PCD) in § 153.255.
   (B)   Requirements by type of sign.
      (1)   Freestanding. Freestanding signs are permitted and shall conform to the provisions set forth for (GC), (SO), and (PCD) in § 153.255 with the following exceptions:
         (a)   The minimum clearance under freestanding signs when installed over an area used by motor vehicles and bicycles shall be 15 feet; eight feet when installed over an area used by pedestrians; no minimum clearance when neither of the foregoing restrictions apply;
         (b)   The horizontal dimension of such sign is no greater than ten feet; and
         (c)   Electronic message center signs are permitted as specified in § 153.251.
      (2)   Projecting signs. Projecting signs are permitted and shall conform to the provisions set forth for (GC), (SO), and (PCD) in § 153.255 with the following exceptions. The minimum clearance under projecting signs when installed over an area used by motor vehicles and bicycles shall be 15 feet; eight feet when installed over an area used by pedestrians; no minimum clearance when neither of the foregoing restrictions apply.
      (3)   Wall signs. Wall signs are permitted and shall conform to the provisions set forth for (GC), (SO), and (PCD) in § 153.255.
      (4)   Window signs. Window signs are permitted and shall conform to the provisions set forth for (GC), (SO), and (PCD) in § 153.255.
(Ord. 96-152, passed 10-7-1996; Ord. 2013-031, passed 7-15-2013)