At the time of preliminary site plan review, the Planning Commission or Director shall specify which of the following data shall be contained on the final site plan:
(A) The owners, zoning, and present use of adjoining lands;
(B) Location of all minimum building setback lines;
(C) Location, type, and size of vehicular ingress and egress to the site;
(D) A boundary survey;
(E) Location, type, size, and height of all fencing, screening, and buffering where required by this code;
(F) Existing topography with a maximum two-foot contour intervals and the proposed finished grading by contour;
(G) Provisions for the adequate control of erosion and sedimentation indicating the proposed temporary and permanent control practices and measures which will be implemented during all phases of clearing, grading, and construction;
(H) All off-street parking and parking bays, loading spaces, and walkways indicating type of surfacing and showing the number of parking spaces provided and the number required;
(I) Number of floors, floor area, height and location of each building, and proposed general use for each building. In a multi-family residential building, the number, size, and type of dwelling units shall be shown;
(J) Building elevations depicting actual composition and architectural style for all proposed structures;
(K) Provisions for the adequate disposition of natural and stormwater on and off-site, in accordance with current design criteria and construction standards of the village, including, but not limited to, the calculation of the contributing drainage area in acres and the location, size, type, and grade of ditches, catch basins, inlets, pipes, and other drainage structures;
(L) All existing and proposed sanitary sewer facilities indicating all pipe sizes, types, grades, invert elevations, location of manholes, and such other data as may be deemed necessary by the Village Engineer;
(M) All existing and proposed water facilities including all water mains, their sizes, valves, and fire hydrant locations;
(N) The location of any proposed refuse removal pads;
(O) Location and size of all recreation and open space areas;
(P) A landscaping and lighting plan;
(Q) Floodplain limits which shall be established by flood hazard maps on file with the Director of Inspection and Engineering and/or engineering methods;
(R) The location, width, size, and intended purpose of all easements and right-of-way and whether they are to be publicly or privately maintained. A plan copy, suitable for recording, shall be submitted showing any rights-of-way and/or easements for public dedication;
(S) (1) The following data relative to all existing and proposed streets:
(a) Location;
(b) Width;
(c) Names;
(d) Curve data;
(e) Grades; and
(f) Site distances.
(2) Typical sections shall be provided for all proposed streets or travel-ways.
(T) Such other relevant data as the Planning Commission or Director of Inspection and Engineering may require.
(Ord. 96-152, passed 10-7-1996)