The final plat shall be submitted to the Planning Commission in India (permanent) ink on tracing cloth eighteen inches by twenty-four inches or, if a larger size is required, it shall be increased by multiples of six inches in each direction.
The final plat shall show:
(a) Name of subdivision;
(b) Location by section, municipality, township, county and state;
(c) North point, scale of plan (not less than one inch equals one hundred feet);
(d) Plat boundaries;
(e) Exact width and location of all streets and alleys within and adjoining the plat;
(f) Names of proposed streets;
(g) Lengths of all arcs, radii, internal angles, points of curvature and tangent bearings;
(h) Easements for rights of way provided for public services or utilities;
(i) Lot numbers and lines with accurate dimensions in feet and hundredths and with bearings or angles to street and alley lines;
(j) Accurate locations and materials of monuments;
(k) Building setback lines;
(l) Certification by a registered civil engineer or surveyor to the effect that the plan represents a survey made by him and that all the monuments shown thereon actually exist and that their location and material are correctly shown;
(m) Acknowledgment by the owner of his adoption of the plat and dedication of other streets and any other public areas;
(n) Space for statements of approval.
(Ord. 5921/62. Passed 5-14-62.)