Prints of a preliminary plat should be prepared and submitted from an original tracing at a minimum size of eighteen inches by twenty-four inches. In the event a larger size print is required, the preliminary plat may be submitted on prints enlarged by multiples of six inches in each direction. The preliminary plat shall show the following:
(a) Proposed name of the subdivision, which shall not duplicate the name of any other subdivision in the locality;
(b) Location by section, municipality, township, county and state;
(c) Name and address of developer and the engineer;
(d) Scale at a minimum of one inch equals one hundred feet;
(e) Date;
(f) North point;
(g) Boundaries of the proposed subdivision indicated by heavy solid line and acreage contained therein;
(h) Location, widths and names of all existing or platted streets;
(i) Existing railroads and utilities, rights of way, easements, parks and other public spaces, permanent buildings, section and corporation lines;
(j) Preliminary layout of proposed streets, including names and widths, and the width of alleys or easements;
(k) Layout, numbers and dimension of lots;
(l) Parcels of land to be dedicated or reserved for public use;
(m) Building setback lines;
(n) A typewritten copy of the proposed covenants and restrictions;
(o) A vicinity map at a scale of not more than one inch equals 1,000 feet, showing the related position of the proposed plat to the surrounding territory.
(Ord. 5921/62. Passed 5-14-62.)