§ 150.040 LAYOUT OF THE MANUFACTURED HOME COMMUNITY.
   (A)   All areas of the manufactured home community shall be drained to prevent ponding of water. If necessary, a storm drainage system shall be installed.
   (B)   Section 9.3 of the Act specifies the minimum square footage of each site and the location of the home on the site. (See § 150.003, Illustrations A and B.) There shall be a minimum street frontage of 25 linear feet for each site.
   (C)   Manufactured homes located on sites constructed prior to July 1, 1998 shall be at least five feet from the property line of the manufactured home community and ten feet from any public street, alley or building. There shall be a minimum separation of ten feet from the side of a manufactured home to another manufactured home and a minimum of five feet from the end of a manufactured home to another manufactured home.
   (D)   Manufactured homes located on sites constructed after July 1, 1998 shall be located at least five feet from the manufactured home community property line, ten feet from public or private streets, alleys, buildings or other manufactured homes, and shall not extend over a sidewalk.
   (E)   All portions of sheds, carports, garages, porches and similar structures constructed after July 1, 1998 shall be at least three feet from the manufactured home community property line, five feet from any other structure on adjacent sites, and ten feet from all streets. For corner sites, sheds shall be at least three feet from all streets. Existing portions of sheds, carports, garages, porches and similar structures may be replaced at the same location without complying with the requirements of this division (E).
   (F)   When questions arise concerning the property lines of the manufactured home community, the licensee shall be responsible for identifying the legal location.
(1975 Code, § 35-200) (Ord. 2023-7-19A, passed 7-19-2023) Penalty, see § 150.999