16.16.060   Information required.
   Each tentative map shall contain the following information:
   1.   The name of the proposed subdivision, and designation as a tentative map;
   2.   The name and address of the owner of the property proposed to be subdivided;
   3.   The name and address of the subdivider;
   4.   The name of the engineer, surveyor or firm who prepared the map;
   5.   The approximate acreage;
   6.   The north point;
   7.   The scale;
   8.   The date;
   9.   The boundary line;
   10.   The location and width of all streets and alleys within the boundaries of the proposed subdivision;
   11.   The proposed names of all streets within the boundaries of the proposed subdivision; proposed streets that are obviously in line with others already named and existing should be given the same name;
   12.   The name, location and width of adjacent streets;
   13.   The lot lines and approximate dimensions; lots shall be numbered consecutively;
   14.   The approximate location and width of watercourses or areas subject to inundation from floods, including flood plain boundaries, and the location of structures, irrigation ditches, and other permanent physical features;
   15.   An accurate description of the exterior boundaries of the subdivision or legal description of the property comprising the subdivision, a vicinity map indicating the location of the proposed subdivision in relation to the surrounding area or region;
   16.   The width and location of all existing or proposed public or private easements;
   17.   The proposed use of lots as to desired residential, commercial, industrial or other uses;
   18.   Any railroads;
   19.   The approximate radius of curves;
   20.   The zoning district in which the proposed subdivision is located;
   21.   The general plan use designation for the area of the proposed subdivision;
   22.   Any public areas proposed;
   23.   The dimensions and locations of any existing buildings that are to remain in place on the property; the variety, size and location of all existing trees having a diameter of four inches or greater, except orchard trees, which shall be shown by general area, location and spacing or rows;
   24.   The locations of any existing wells, pipelines or septic tanks;
   25.   The location of city limit lines;
   26.   Oak trees having a trunk diameter exceeding four inches, measured at a point five feet above the existing ground level;
   27.   Any of the foregoing information as may not be practicably shown on the map shall be contained in a written statement accompanying the map. (Ord. 2017-01 (part), 2017: prior code § 9120)