(a) Minimum lot width: none (minimum frontage on a public street shall be thirty-five (35) feet).
(b) Minimum building setback:
(1) Minimum front building setback: forty (40) feet.
(2) Minimum side building setback: ten (10) feet (twenty (20) feet for side abutting a residential district). An average of ten (10) feet may meet the side building setback requirements under the following requirements:
a. A special use permit is required.
b. Under no circumstances shall the principal building be any closer than five (5) feet from the side property line.
c. An opaque, vegetative buffer is required along the side property line where the averaging option is approved. However, if topography or other issues make the buffer impractical, other options may be used.
(3) Minimum rear building setback: ten (10) feet (twenty (20) feet for side adjoining a residential district).
(c) Maximum building height: fifty (50) feet.
(d) Minimum lot sizes and maximum lot coverage's. Within the B-2 General Business District, there is no minimum lot size, and development activities can cover one hundred percent (100%) of the total lot area not within the required setbacks. However, if the development activity requires a sedimentation/erosion control plan, the maximum permissible impervious surface coverage, as defined by this chapter, shall not exceed thirty-six percent (36%) of the total lot area, or twenty-four percent (24%) of the total lot area if the lot is located within a WS-4 critical area or if the lot adjoins a curb and gutter street system.
(Ord. of 1/10/05; Ord. of 12/6/10; Ord. of 6/28/21)