Section 9-3055.4   Dimensional requirements.
   (a)   Minimum lot width: none (minimum frontage on a public street shall be thirty-five (35) feet).
   (b)   Minimum building setback:
   (1)   Minimum front building setback: zero (0) feet.
   (2)   Minimum side building setback: zero (0) feet (fifteen (15) feet for side adjoining a residential district).
   (3)   Minimum rear building setback: zero (0) feet (fifteen (15) feet for side adjoining a residential district).
   (4)   Note: If the side or rear yards are provided, they must be at least ten (10) feet in width.
   (c)   Maximum building height: maximum building height: fifty (50) feet.
   (d)   Minimum lot sizes and maximum lot coverage. Within the B-1 Central Business District, there is no minimum lot size, and development activities can cover one hundred percent (100%) of the lot area. However, if the development activity requires a sedimentation/erosion control plan, the maximum permissible impervious surface coverage, as defined by this chapter, shall not exceed thirty-six percent (36%) of the total lot area, or twenty-four (24%) of the total lot area if the lot is located within a WS-4 critical area or if the lot adjoins a curb and gutter street system. (Ord. of 1/10/05; Ord. of 12/6/10; Ord. of 6/28/21)