In-fill development on previously platted lots shall conform to the applicable zoning standards in effect at the time of final plat approval. If zoning regulations, recorded plats, approved final site plans, or other documentation are available to provide information on previous standards, then such documentation shall be used to determine applicable standards for the proposed in-fill development. These standards may include, but shall not be limited to:
(a) Minimum lot dimension and area;
(b) Minimum building size (gross floor area and building height);
(c) Minimum yard setbacks on front, side and rear yards;
(d) Restrictions on accessory uses, such as storage sheds, pools, etc.;
(e) Off-street parking;
(f) Restrictions on dwelling unit type;
(g) Minimum ground floor area;
(h) Dedication or reservation of easements, rights-of-way, or parkland.
(Ord. 173-2000. Passed 12-17-00.)