7A.11.3.   SCENIC CORRIDOR ZONE (SCZ) DISTRICT
   A.   Location
      The scenic corridor (SCZ) includes any portion of property or within 400 feet, measured in any direction, of the of a , as designated on the map. If any portion of a is within the SCZ , the entire will be treated, for purposes only, as though it were entirely within the SCZ .
   B.   Maximum Total Area
      1.   For commercial or industrial uses: 1.25 square feet per foot of   with a minimum allowance of not less than 25 square feet and a maximum of 250 square feet per . must be oriented toward a , , , or the interior of the .
      2.   For multifamily complexes: 20 square feet per   .
   C.    Compliance
      All in this shall comply with applicable provisions of the and must be approved through the applicable review process.
   D.   Colors
      All shall use colors that are predominant within the surrounding landscape, such as desert and earth tones, as required in the scenic corridor provisions of the .
   E.   Permitted
      1.    generally permitted and types listed in Section 7A.10, except as modified by this subsection for this , and exempt under Section 7A.8 Exempt and Prohibited .
      2.    .
      3.    , monument and low profile only.
         a.   Maximum number per :
            (1)    : One for the first 450 feet of street . A second is permitted for a street from 451 feet to 850 feet. A third is permitted for a   from 851 feet to 1250 feet. This rule applies for each subsequent 400 feet of     .
            (2)    : One for the first 450 feet of   . A second is permitted for a   of 451 feet to 700 feet. A third is permitted for a   of 701 feet to 950 feet. This rule applies for each subsequent 250 feet of   .
            (3)    : One for the first 450 feet of   . A second is permitted for a   of 451 feet to 700 feet. A third is permitted for a   of 701 feet to 950 feet. This rule applies for each subsequent 250 feet of   .
         b.   Maximum area:
            (1)   Multifamily residential uses: 20 square feet per   .
            (2)   Commercial or industrial uses: 35 square feet per if located within the SCZ buffer, 50 square feet per if located outside the SCZ buffer.
         c.   Maximum height: Ten feet.
         d.   Location:
            (1)    : Maximum height shall be located no less than 7.5 feet behind the leading edge of the SCZ buffer and within 50 feet of the line. may be located one foot closer to the leading edge of the SCZ buffer for each foot (below the maximum) they are reduced in height.
            (2)   All other : Within 20 feet of the line and at least 150 feet from the of the .
         e.    that include or consist of a three-dimensional representation of a figure or object are prohibited.
         f.   Lighting: panels shall be . Light shall be emitted through individual translucent letters and/or symbols only, or individual letters and/or symbols may be halo illuminated. Unused panels shall be and designed to match the rest of the .
         g.   Within SCZ buffer copy and exposed neon are prohibited.
      4.    (medical uses).
         a.   Maximum area: Eight square feet.
         b.   Maximum height: Four feet to top of .
         c.   Permitted: Only if no on or .
      5.    .
      6.    .
         a.   Within the scenic corridor 30 foot landscape buffer the following shall apply:
            (1)   Minimum : Ten acres.
            (2)   Maximum area: Three square feet; identification or not to exceed one .
            (3)   Maximum number: One per vehicular entrance.
            (4)   Location: Within 20 feet of the entrance.
      7.    .
      8.    .
(Am. Ord. 11803, 12/8/2020)