1153.02 GENERAL STANDARDS AND REQUIREMENTS.
   (a)   Minimum Facilities. Uses for which off-street loading facilities are required by this Zoning Code but which are located in buildings or structures that have a gross floor area that is less than the minimum gross floor area specified in Section 1153.01 of this Zoning Code for which off-street loading facilities are required shall be provided with adequate receiving facilities accessible by motor vehicle from any adjacent alley, service drive, or open space on the same lot.
   (b)   Location. All required loading berths shall be off-street and shall be located on the same lot as the specific use to be served. No permitted or required loading berth shall be located within a required front yard or side yard. No permitted or required loading space or berth shall be located within forty (40) feet of the nearest point of intersection of any two (2) streets or highways.
   (c)   Access. Each required loading berth shall be served by appropriate means of vehicular access to a street or alley in a manner that will not unreasonably interfere with traffic movement.
   (d)   Storage, Repair and Service. No storage, motor vehicle repair work, or service of any kind other than emergency shall be permitted within any required loading berth.
   (e)   Utilization. Space allocated to a required loading berth shall not be used to satisfy any requirement of this Zoning Code for off-street parking spaces.
   (f)   Computation. The term "floor area" is used for computation purposes as defined in Section 1155.09 (b) of this Zoning Code.