(A) The minimum width of alley right-of-way shall be 20 feet.
(B) Alley intersections and sharp changes in alignment shall be avoided. Where they are required, corners shall be cut off sufficiently to permit safe vehicular movement.
(C) Dead-end alleys shall be avoided where possible. If unavoidable, they shall be provided with adequate turn around facilities acceptable to the Village Engineer and Planning Commission.
(D) Alley surfaces shall be constructed of not less than a 12-inch thick CA-6 crushed aggregate and surfaced with an A-3 surface.
(Ord. 16-102, passed 4-4-2016)