1125.05  PRELIMINARY PLAT CONTENTS.
   The preliminary plat shall be drawn at scale not less than 100 feet to the inch on one or more sheets twenty-four by thirty-six inches in size, and shall contain the following information:
   (a)   The proposed name of the subdivision;
   (b)   The location by section, range and township or other surveys;
   (c)   The Names, addresses and telephone numbers of the subdivider and professional engineer and/or registered surveyor who prepared the plat;
   (d)   The date;
   (e)   The north point, boundaries of the subdivision and its acreage and scale of plat;
   (f)   The names of adjacent subdivisions, owners of adjoining parcels of unsubdivided land and the location of their boundary lines;
   (g)   The locations, widths and names of existing streets, railroad rights of way, easements, parks, permanent buildings and corporation and township lines; location of wooded areas and other significant topographic and natural features within and adjacent to the plat for a minimum distance of 200 feet;
   (h)   The zoning classification of the tract and adjoining properties and a description of proposed zoning changes, if any;
   (i)   The existing contours at an interval of not greater than two feet if the slope of the ground is fifteen percent (15%) or less and not greater than five feet where the slope is more than fifteen percent (15%);
   (j)   The existing sewers, water lines, culverts and other underground structures, and power transmission poles and lines, within and adjacent to the tract;
   (k)   The existing and proposed drainage system, including natural and man-made water courses, underground tile lines, existing Federal Emergency Management Agency (F.E.M.A.) designated flood plain areas and existing wetlands, within  and adjacent to the tract.
   (l)   The location, names and widths of proposed streets and easements;
   (m)   The location of all proposed water and sewer lines, showing their connection with the existing system, and the existing soil conditions of each lot.
   (n)   The approximate size of each lot;
   (o)   A vicinity map at a scale of not less than 2,000 feet to the inch shall be shown on, or accompany, the preliminary plat.  This map shall show all existing subdivisions, roads and tract lines and the nearest existing thoroughfares.  It shall also show the most advantageous connections between the roads in the proposed subdivision and those of the neighboring areas; and
   (p)   The location of existing and proposed sidewalks and public walkways.
(Ord. 77-55.  Passed 9-6-77; Ord. 80-26.  Passed 6-16-80; Ord. 96-5.  Passed 2- 20-96.)