Sec. 8-1.07. Amendments: Chapter 1, Division II, Section 107 Submittal Documents.
   Section 107.6 "Mechanical, Plumbing, and Electrical Construction Documents" is added to Section 107 to read as follows:
   107.6 Mechanical, Plumbing, and Electrical Construction Documents.
   Mechanical, gas plumbing, and electrical construction documents shall be submitted to indicate conformance to this Code and coordination with the construction documents for all residential occupancies when building height exceeds three stories in height or building area exceeds three thousand (3000) square feet in area and all commercial and industrial occupancies when electrical service size exceeds two hundred (200) amperes. Mechanical, gas, plumbing, and electrical line drawings shall be submitted for all residential occupancies when building area is three thousand (3000) square feet or less.
   Construction documents for all residential occupancies when electrical service size exceeds four hundred (400) amperes and all commercial and industrial occupancies when electrical service size exceeds six hundred (600) amperes, and all parking lot lighting when parking space count exceeds nine (9) parking spaces shall be prepared by the applicable registered design professional and each sheet shall bear the seal and signature of the registered design professional properly licensed in the State of California. All construction documents submitted for plan review shall indicate compliance with the applicable 2019 California Mechanical Code, 2019 California Plumbing Code, and the 2019 California Electrical Code, all applicable State of California codes, and all applicable City of Thousand Oaks Municipal codes and ordinances.
(§ 2, Ord. 1669-NS, eff. January 10, 2020)