Concrete curbs and gutters shall be installed on each side of the paved street surface. The type selected shall be either stand-up, rolled or V-curb, constructed as shown in the cross section detail drawing in Appendix “A”, Curb and Gutter Details, and according to the following additional specifications:
(A) Base. The base for the curb and gutter shall be three inches of compacted #53 aggregate or #11 stone.
(B) Expansion and control joints. Expansion joints shall be provided at the ends of each radius section and every 150 lineal feet of roadway. Control joints shall be provided every ten feet. Joints shall be filled with an approved sealing or expansion material.
(C) Concrete. All concrete used in the curb and gutter shall be 3,500 per square inch, or greater as required by the traffic load, and shall meet the standard specifications for curbs and gutters of the Indiana Department of Transportation.
(Ord. 970, passed 3-5-2007)