§ 150.107 ALTERNATE MINIMUM STANDARDS FOR MATERIALS AND MINIMUM PAVING DEPTH.

   Pavement shall meet: the following standards:

Material	Depth Industrial and Collector Streets	Local Streets	Alleys
Sub-base (under all pavements):
Compacted aggregate #53 (95%) density	8 inches	6 inches	6 inches
Flexible Asphaltic Pavement
Base, #5	3 inches	2 inches	N/A
Binder, #9	2 inches	N/A	N/A
Surface, #11	1 inch	1 inch	N/A
Portland Cement Concrete Pavement:
Concrete (3,500 p.s.i. or greater as required by traffic load)*	7 inches	6 inches	N/A
Chip and Seal Pavement	N/A	N/A	Local standard

 

*Expansion joints shall be provided at the ends of each radius section and every 150 feet. Control joints shall be provided every ten feet. Joints shall be filled with approved expansion or sealing material.

(Ord. 970, passed 3-5-2007)