§ 51.058 WASTEWATER VOLUME DETERMINATION.
   (A)   The volume of flow used for computing industrial waste surcharges shall be the metered water consumption of the user as shown in the records of water meter readings maintained by the village except as herein provided in this section.
   (B)   If the user discharging industrial wastes into the public sewers procures any part, or all of this water from sources other than the village water system, all or part of which is discharged into the public sewer, the user shall install and maintain at his or her expense water meters of a type approved by the Village Administrator for the purpose of determining the volume of water obtained from those other sources.
   (C)   The user discharging industrial wastes into the public sewers may install and maintain at his or her expense metering devices for determining the volume of waste being discharged to the public sewer, from which the industrial waste surcharge would be computed. The measuring devices shall be of a type acceptable to the Village Administrator.
   (D)   The Village Administrator may require the installation of devices for measuring the volume of waste discharged, if these volumes cannot otherwise be determined from the metered water consumption records.
   (E)   Any metering device for determining the volume of waste discharged to the public sewer shall be installed, owned and maintained by the user. Following approval and installation, such meters may not be removed without the consent of the Village Administrator.
(Ord. 78-4, passed 2-13-1978; Ord. 92-20, passed 9-28-1992) Penalty, see § 51.999