All final adjustments of castings will be accomplished by the use of concrete adjusting rings set in butyl rope joint sealant; mortar joints will not be allowed. Height of adjusting rings shall not exceed ten inches (10") (no more than 3 rings) and the minimum adjusting ring thickness shall be two inches (2"). Frames set in concrete are not permitted. Metal or plastic shims may be used for fine adjustments of frames.
Public utilities, which are outside of the project limits (off- site), shall be permanently located with clearly labeled, PVC markers subject to the approval of the Village Engineer. The marker installation requirement and location shall be determined on a case-by-case basis. (Ord. 2018-02-20, 2-20-2018)