A. Temporary turn arounds when required by the Village Board shall be constructed with the following specifications:
1. The geometry of this temporary paving shall be a "T" configuration at the end of such a street which is paved from inside of sidewalk to the far side, inside of sidewalk fifteen feet (15') wide with two (2) 15-foot radii to the street. The curb and gutter shall not be constructed through the temporary turn around, unless the curb is M-3.12 on that street.
2. The temporary turn around shall be paved with eight inches (8") of compacted crushed limestone base and two and one-half inches (21/2") of hot-mix asphalt surface course with no curb and gutter around the edges.
3. The section of sidewalk through the temporary turn around shall be six inches (6") thick.
4. The developer extending the street in the future shall remove the excess paving and base, construct the additional curbing so that the curb and gutter is continuous and uninterrupted from one development to another development, and shall landscape the parkway where disrupted by the asphalt and base removal. (Ord. 2018-02-20, 2-20-2018)