Installation of regulatory signs will be required of the developer where shown on the final engineering plans. All such signs shall conform to the "Manual On Uniform Traffic Control Devices for Streets and Highways", latest edition.
Stop signs shall be 30" x 30" on all streets. Yield signs shall be 30" x 30". Speed limit signs (R2-1) shall be 24" x 30". Warning signs shall be 30" x 30". "No Parking" signs shall be 12" x 18". All posts shall be Telespar, seven foot (7') from finished grade to the bottom of the sign, 1.75 inch square with a pyramidal rain cap with a four foot (4') deep two inch (2") Telespar base, or approved equal.
All sign faces shall be 3M Company, or approved equal, using reflective high intensity face material. Stop signs will be required where collector streets intersect with arterial streets and all other intersections where warranted and shall include a twenty four inch (24") stop bar.
Cross walks shall be installed where determined necessary by pedestrian and traffic volumes or upon recommendation of the Village Engineer.
All striping shall follow IDOT standards and shall be thermoplastic pavement markings. (Ord. 2018-02-20, 2-20-2018)