These requirements are intended to ensure that for drive through or drive-up facilities, there is adequate on-site vehicle maneuvering and circulation area, that stacking or queuing vehicles do not impede traffic on abutting streets, and that stacking lanes will not have a negative impact on abutting lands.
(a) All facilities or uses where services are provided or products sold through a service window or from a drive-up kiosk must provide adequate stacking lane area. A minimum of one hundred fifty (150) feet for a single stacking lane or eighty (80) feet per lane when there is more than one stacking lane shall be required for all drive through or drive-up facilities. A stacking lane shall be measured from the curb cut where vehicles enter the site, along the vehicle route to the service window or kiosk.
(b) Stacking lanes must be designed so that all anticipated vehicles can be stored on-site and so that they do not interfere with or impede traffic on adjacent streets or internal parking or vehicle circulation.
(c) All stacking lanes must be clearly identified, through the use of means such as striping, raised landscaped islands, and signs.
(d) Stacking lane area must be clearly shown on required Traffic Circulation Plans and compliance with Section 1185.49 regarding traffic circulation shall be required.
(Ord. 2016-11. Passed 4-12-16.)