(a) The purpose of the C-3 High Density Commercial District is to:
(1) Provide for a wide range of commercial uses, whole nature of business requires convenient automobile and truck access. Such uses must be accessible to the City as well as the entire region. They must be planned in such a way as to promote and protect commercial and working areas.
(2) To provide for the orderly development and concentration of highway and arterial commercial uses at appropriate locations; and to encourage the development of such uses and in such a manner as to minimize traffic hazards and interference with other uses in the vicinity.
(b) Lot Provisions.
(c) Setbacks.
(1) Accessory structures shall be set back at least three (3) feet from all rear and side property Lines.
(2) The alignment provisions shall apply.
(3) Architectural features may project into a required setback as provided below:
A. Fire escapes, chimneys, cornices, awnings, canopies, eaves, sills, pilasters,
(4) Parking shall be permitted in the front setback only on approved driveways.
(d) Building Height.
(1) The maximum height of an accessory structure shall not exceed eighteen (18) feet, except as provided in Section 1333.27.
(e) Performance Standards.
(1) All construction shall substantially conform in street orientation and massing to adjacent structures, except where this shall cause conflict with other provisions.
(f) Permitted, Accessory and Conditional Uses.
(g) Signage. See Section 1333.16 and Appendix C for Sign Performance Standards and for Sign Design Ordinance.
(Ord. 2023-02. Passed 4-17-23.)