(A) Purpose. The purpose of the R-3A Multiple Family Residential District is to provide for high density housing in the form of townhouses.
(B) Requirements.
(1) Public sewer: all buildings and units must be serviced with public sewer;
(2) Minimum lot area:
(a) 10,000 square feet for single-family dwelling lots;
(b) 15,000 square feet for two-family or multi-family dwelling lots;
(3) Minimum lot area for townhouses: 5,000 square feet;
(4) Minimum lot width:
(a) 100 feet for single-family dwellings;
(b) 100 feet for structures with more than one dwelling;
(5) Front yard setback: 25 feet;
(6) Rear yard setback: 25% of lot depth or 25 feet, whichever is lesser;
(7) Side yard setback:
(a) 10 feet interior;
(b) 10 feet interior for building of 2-1/2 stories or more in height;
(c) 15 feet corner;
(d) 25 feet for public or semi-public building abutting a residential lot;
(8) Height: 3 stories or 40 feet maximum, whichever is greater;
(9) Minimum ground floor area per dwelling: See § 153.027.
(C) Permitted principal uses.
(1) Townhouses;
(2) All uses listed as permitted uses in the R-2 District;
(3) Residential structures containing more than one dwelling, excepting apartments.
(D) Permitted accessory uses. All uses listed as permitted accessory uses in the R-1 District.
(E) Uses requiring a conditional use permit.
(1) All uses listed as conditional uses in the R-1 District;
(2) Planned unit development as regulated by this chapter;
(3) Resorts and tourist accommodations;
(4) Clubs and lodges operating as non-profit institutions;
(5) Nursing homes, rest homes.
(Prior Code, § 903.03) (Am. Ord. 2004-4-2, passed - -2004; Am. Ord. 2019-8-3, passed 8-13-2019)