1. Proposed streets shall not intersect with collector, arterial or primary streets on the same side at intervals of less than 800 feet as measured from centerline to centerline.
2. The distance between centerlines of streets opening onto the opposite side of a proposed or existing street shall be not less than 150 feet unless the streets are directly opposite each other.
3. Multiple intersections involving the junction of more than two streets shall not be permitted.
4. Proposed street intersections shall be designed at right angles. The intersection of a new street with an existing street shall not be at an angle of less than 75 degrees, except that all intersections with an arterial or collector street shall be at 90 degrees.
5. Minimum curb radius at the intersection of two local streets shall be at least 20 feet; and minimum curve radius at an intersection of a local street and a collector or arterial street shall be at least 25 feet.
6. No structure, fence, planting or other obstruction shall be permitted at an intersection where it will interfere with vehicular sight distance required pursuant to § 512.7 of this Ordinance.
7. Minimum horizontal and vertical sight distances shall be established in accordance with PennDOT regulation in 67 Pa.Code Chapter 441, as amended.
8. Where sidewalks or pedestrian paths exist, intersections shall be designed and constructed with stop bars and pedestrian crosswalks, either pattern Thermoplastic or with a patterned/textured paving material. Along major intersections with arterial or collector streets, or at mid block crossings, the Township may require installation of patterned concrete or asphalt crosswalks or other traffic calming measures. Patterned thermoplastic crosswalks and patterned/textured paving shall conform to PennDOT Publication 111M and Publication 447.
(Ord. 163, passed 2-28-2012, § 512)