CHAPTER 1244: PRELIMINARY PLATS

Section

   1244.01   Number of blueprints of plat

   1244.02   Vicinity sketch

   1244.03   Scale

   1244.04   General requirements

   CROSS REFERENCES

   Authority to adopt subdivision regulations, see R.C. § 711.101

   Original plats, see R.C. §§ 711.01 et seq.

   Plat and subdivision defined, see R.C. § 711.001

   Revision of plats, see R.C. §§ 711.28 et seq.

   Subdivisions in flood hazard areas, see §§ 1424.10, 1462.04(c)

   Vacating plats, see R.C. §§ 711.17 et seq.

   Violation of regulations, see R.C. § 711.102

§ 1244.01 NUMBER OF BLUEPRINTS OF PLAT.

   Twenty blueprints prepared by a registered professional engineer or surveyor shall accompany an application in writing to the Commission for the approval of the preliminary plat of the subdivision.

§ 1244.02 VICINITY SKETCH.

   A vicinity sketch at the scale of 400 feet or more to the inch shall be shown on or shall accompany the preliminary plat. The vicinity sketch shall show all existing subdivisions and the street and tract lines of all acreage parcels of land, together with the names of record owners of such parcels, immediately adjoining the proposed subdivision and between it and the nearest existing streets. It shall also show how the streets and service drives in the proposed subdivision may connect with existing and proposed streets and service drives in neighborhood subdivisions or unplatted property to produce the most advantageous development of the entire neighborhood.

(Ord. 1953-110, passed 12-30-1953)

§ 1244.03 SCALE.

   The horizontal scale of the preliminary plat shall be 100 feet or less to the inch, and the vertical scale of street and sewer profiles 20 feet or less to the inch.

(Ord. 1953-110, passed 12-30-1953)