20.47.030   Property development standards.
   A.   All property within the auto center specific plan district shall be developed and maintained in accordance with all provisions of the auto center specific plan, the design guidelines for the Signal Hill auto center, and applicable development standards and city codes except as otherwise provided in this chapter.
   B.   Pay phones and vending machines shall be subject to the following criteria:
   1.   Pay phones and vending machines must be located behind the required front and side setbacks located adjacent to streets.
   2.   Pay phones and vending machines shall not encroach, nor project into driveways, required off-street parking stalls or pedestrian pathways.
   3.   Prior to the installation of a pay phone or vending machine, the applicant shall: (a) obtain approval of a site plan pursuant to Chapter 20.52; (b) obtain a building permit (when applicable); and (c) pay fees as established by the city council by resolution and may be adjusted from time to time.
   4.   Failure to obtain a permit shall cause a double fee to be imposed pursuant to Uniform Building Code Section 15.02.060 as established by resolution and may be adjusted from time to time.
   5.   Pay phones and vending machines shall comply with the Americans with Disabilities Act, and have adequate lighting to create a safe environment and not create glare onto adjacent properties.
   6.   Pay phones and vending machines shall not have overhead wiring or exposed conduit.
   7.   Prior to installation, pay phones and vending machines shall require approval by the planning department to assure that the location does not interfere with public access, is in a safe and secure location, provides convenient access, will not create an excessive number of such machines, and will not create any conditions of public nuisance.
   8.   Pay phones and vending machines and all areas surrounding said machines shall be kept in a clean and orderly manner by the owner or tenant of the property upon which the phone or machine is located.
(Ord. 98-12-1243 § 3 (part); Ord. 89-07- 1034 § 1 (part))