(a) The lot arrangement and design shall be such that all lots will provide satisfactory building sites that can accommodate a structure and required setbacks in the applicable zoning district. Lots shall also be arranged so that all lots will have frontage on a public street or road and will provide building sites properly related to topography and the character of surrounding development.
(b) The lots shall be generally rectangular in form; triangular, elongated, or other shapes that restrict its use as a building site shall be avoided to the maximum extent feasible unless the applicant can demonstrate special circumstances requiring irregular lots to the Planning Commission.
(c) All side lot lines shall be at right angles to street lines and radial to curved street lines except where the Planning Commission determines that a variation to this rule will provide a better street and sublot layout.
(d) Lots shall be subject to the provisions of Section 1113.01(d)(3) and shall be of sufficient width to permit the required building setbacks.
(e) Excessive length in relation to width shall be avoided.
(f) Every lot shall have access to it that is sufficient to afford a reasonable means of ingress and egress for emergency vehicles as well as for all those likely to need or desire access to the property in its intended use.
(g) Where compliance with the site development standards of Section 1113.01(d)(3) will result in a requirement for a greater lot area or width than the standards set forth herein, the more restrictive requirement shall take precedence and shall be required.
(Ord. 2022-22. Passed 5-10-22.)