Pools shall be equipped with suitable facilities for adding makeup water as needed. There shall be no physical connection between the water supply line and the pool system. If the makeup water is added directly to the pool, the outlet shall be at least six inches above the upper rim of the pool. If the makeup water supply line discharges to a surge or balancing tank, the point of discharge shall be at least six inches above the rim of the tank. If a hose connection from a sill cock or other plumbing fixture is to be used for supplying makeup water, then an approved vacuum breaker shall be installed at a height not less than seven-feet six-inches above the floor, platform or ground upon which a person would stand when operating the sill cock or control valve. Maximum size of the fillpipe is to be two inches. (Ord. 1212-79. Passed 9-24-79.)