(A) All electrical work shall comply with the National Electrical Code.
(B) All electrical work should be done by a licensed electrician.
(C) All services shall be spotted by the Electrical Supervisor. Any special material for a service attachment will be furnished by the town.
(D) All masts shall be a minimum of two and one-half inches, except in certain cases of a short span, in which two inches would be allowed at the discretion of the Electrical Supervisor.
(E) The meter base shall be a minimum of 150-amp jaws.
(F) Ground wire shall be connected to the meter base.
(G) No meter is to be installed on town poles.
(H) No services will be disconnected by an electrician. Contact the Utility Department when necessary to disconnect service.
(I) No seals shall be broken or meters removed except by the town personnel.
(J) A service entrance cable shall be exposed the entire length on the outside wall of the building.
(K) Entrance cable used on the inside of a building must be in rigid metallic conduit.
(L) All bonds and licenses are required before work shall be started.
(1992 Code, § 50.02) (Ord. passed 12-9-1982; Ord. passed 4-14-1983) Penalty, see § 50.99