(a) Minimum Area Designation. As outlined in Table 82-10 of Chapter 82.05, except the minimum area for the Oak Hills/Neighborhood Commercial (OH/CN) Land Use Zoning District designation shall be 2.5 acres.
(1) Oak Hills/Neighborhood Commercial (OH/CN) Land Use Zoning District.
(A) Minimum Lot Size: 2.5 acres. Minimum lot size can be less than two and one-half (2.5) acres if the subdivision application is filed concurrently with a Planned Development, Conditional Use Permit, or Department Review application.
(B) Minimum Width: 300 feet.
(C) Minimum Depth: 300 feet.
(D) Site Design. Site design should incorporate effective internal circulation for both vehicular and pedestrian traffic, as well as buffering if adjacent to residential uses.
(2) Oak Hills/General Commercial (OH/CG) Land Use Zoning District.
(A) Minimum Width: 300 feet.
(B) Minimum Depth: 300 feet.
(C) Site Design. Site design within general commercial use areas should include effective internal circulation, designed to minimize traffic impacts on adjacent arterial streets.
(D) Regional Commercial Uses. Regional commercial uses should have access from major highways or arterials, and be of a size and configuration to facilitate development of businesses attracting consumers from a regional market area. Minimum site area for a development project within a regional commercial area should be ten acres.
(d) Development Standards. As outlined in Tables 82-15A and 82-15B of Chapter 82.05, except as noted below:
(1) Oak Hills/Neighborhood Commercial (OH/CN) Land Use Zoning District.
(A) Maximum Lot Coverage: 40 percent.
(B) Side—Street Side Setback: 15 feet.
(C) Floor Area Ratio (FAR): Maximum FAR (floor area/lot area): 0.47.
(2) Oak Hills/General Commercial (OH/CG) Land Use Zoning District.
(A) Maximum Lot Coverage: 60 percent.
(B) Floor Area Ratio (FAR): Maximum FAR (floor area/lot area): 1.20.
(Ord. 4204, passed - -2013)