A panel antenna, or a satellite dish not exceeding 26 inches in diameter, mounted on an active high voltage electrical transmission tower is permitted subject to staff-level site plan and design review, and shall conform to the following development standards:
A. The panel antenna or dish shall not exceed the height of the tower by more than 12 feet.
B. The panel antenna or dish and all brackets and cables shall be painted to match the structure at the point of attachment.
C. The equipment cabinet, if any, is located in one of the following locations:
1. At the base of the tower on which the antenna is mounted;
2. Within any building located on the same parcel as the tower on which the antenna is mounted; or
3. On the ground and outside of any required setback or parking area on the same parcel as the tower on which the antenna is mounted. (Ord. 2013-0020 § 1; Ord. 2013-0007 § 1)